Skip to content

Tile Calculator

Estimate tile quantities, whole boxes and tile purchase costs for your next project.

Measurement Units
Area to Cover
Area 1
Area 1 length. Enter a positive rectangular measurement. Add separate non-overlapping rectangles for irregular surfaces.
Area 1 width. Enter a positive rectangular measurement. Add separate non-overlapping rectangles for irregular surfaces.
Tile Dimensions
Use the actual manufacturer tile length, not a nominal size. Optional when purchasing by manufacturer box coverage.
Use the actual manufacturer tile width. For coverage-per-box purchases, leave both tile dimensions blank if unknown.
Extra coverage for cuts, breakage and spares. Enter 0–100%. Your manual value is preserved when the pattern changes.
Installation & Buying Details (Optional)
Optional joint width added to each tile dimension for individual-tile counts. Blank means zero. Manufacturer box coverage is never adjusted for grout.
Subtract openings or untiled surfaces once. Must be zero or positive and smaller than the gross area. Blank means zero.
Optional whole number from the carton, 1–1,000,000. Leave blank to estimate individual tiles only.
Optional tile-only carton price, up to $1 billion and two decimal places. Excludes taxes, delivery, labor and other materials. A box count is needed for cost.
Load example

Your tile estimate

Enter valid surface measurements and tile dimensions, or manufacturer box coverage.

How to Calculate How Much Tile You Need

Measure the surface, subtract areas that will not be tiled, then allow for cuts and breakage before rounding up to individual tiles or whole boxes. Use the same tile product for every area in one estimate. If rooms use different tiles, calculate them separately. Choose Enter Dimensions for rectangular measurements or I Know the Area when you already have the combined surface area.

Step 1: Calculate the Area to Be Tiled

Multiply length by width for each rectangle. For an irregular floor, wall or backsplash, split the surface into non-overlapping rectangles and add their areas. This calculator accepts up to six. Subtract openings and other untiled areas once in Installation & Buying Details.

Gross area = sum of length × width
12 ft × 10 ft = 120 sq ft

Net area = gross area − areas not being tiled
120 sq ft − 0 sq ft = 120 sq ft

Exclusions must be smaller than the gross surface. Do not include an opening in both the original measurements and the excluded-area field. Use a separate estimate for a different tile size or product.

Step 2: Calculate Tile Coverage

Use actual manufacturer dimensions, which can differ from the nominal size on a label. A square foot contains 144 square inches; a square meter contains 10,000 square centimeters. The optional grout joint is added to both dimensions to estimate a repeating tile-and-joint footprint.

Tile area = tile length × tile width
12 in × 24 in ÷ 144 = 2 sq ft

Tile-and-joint footprint = (length + joint) × (width + joint)
(12 + 0.125) × (24 + 0.125) ÷ 144 ≈ 2.031359 sq ft

This footprint is an area approximation. Real perimeter joints, edge cuts, obstacles and tile orientation can change the pieces needed. For ratios and scaled dimensions, see the Proportion Calculator.

Step 3: Add a Waste Allowance

Add waste to the net surface area before dividing by coverage. Waste covers material lost to cuts, breakage and planned spares; it is not extra finished surface. Pattern suggestions are starting points, not installation standards or guarantees. The editable allowance stays as entered when you change patterns after a manual override.

Area including waste = net area × (1 + waste ÷ 100)
120 sq ft × 1.10 = 132 sq ft

Use the Percentage Calculator to explore other percentage adjustments. The tile calculator accepts 0–100% waste; check the chosen amount with your installer or supplier.

Step 4: Calculate Tiles Needed

Divide the unrounded area by the unrounded tile-and-joint footprint, then round up to the next whole tile. Do this separately for the net area and the area including waste. Do not round the base tile count and then multiply it by the waste percentage; that can introduce an unnecessary extra tile.

Tiles before waste = ceiling(120 ÷ 2.0313585069…) = 60
Tiles including waste = ceiling(132 ÷ 2.0313585069…) = 65

A ceiling leaves an exact whole-number answer unchanged. For example, without grout or waste, 120 sq ft divided by a 2 sq ft tile is exactly 60 tiles.

Step 5: Calculate Boxes Needed

With Tiles per Box, divide the required whole-tile count by the carton’s tile count and round up again. With Area per Box, use the manufacturer-reported coverage directly. Tile dimensions are not required for that method, and grout adjustments are never applied to the carton coverage.

Tile-count method: boxes = ceiling(required tiles ÷ tiles per box)
ceiling(65 ÷ 8) = 9 boxes

Manufacturer-coverage method: boxes = ceiling(area including waste ÷ coverage per box)
ceiling(132 sq ft ÷ 16 sq ft) = 9 boxes

Nine boxes of eight tiles supply 72 tiles, leaving seven above the estimated 65 required tiles. Tile counts and extra tiles are shown only when the necessary information is available; manufacturer coverage alone does not establish the number of pieces in a carton.

Step 6: Estimate Tile Purchase Cost

Enter an optional price per box to estimate the tile purchase only. Prices are US dollars in either measurement system. The total uses the rounded-up box count, not a fractional box quantity.

Tile purchase cost = whole boxes × price per box
9 × $32.00 = $288.00

For material pricing or contractor markup calculations, use the Markup Calculator. Grout, mortar, labor, taxes, delivery and other charges are not automatically added here.

Tile Patterns and Waste Allowances

  • Straight / Grid suggests 10% extra for a simple aligned layout.
  • Half-Offset / Brick suggests 12% for staggered rows and their cuts.
  • Diagonal (45°) suggests 15% for angled perimeter cuts.
  • Herringbone suggests 20% for its interlocking pattern and more complex cuts.

Room shape, tile size, obstacles, breakage and reusable offcuts affect waste. The pattern changes the schematic illustration and the suggested allowance until you enter a manual value. It does not calculate a cutting plan or guarantee that a selected offset is suitable for a particular tile product.

Calculating by Individual Tiles vs. Box Coverage

Individual-tile calculations estimate the number of pieces from geometry. Box coverage uses the coverage stated for the exact carton being purchased. If the two approaches differ, do not alter the manufacturer’s coverage to force agreement: verify actual dimensions, pieces per box and the packaging label. Use the supplier’s purchasing basis for your order. Waste is applied once, and the optional grout joint affects individual-tile estimates only.

Measurement switches retain the original entered measurement for calculation rather than repeatedly converting rounded display values. Converted input displays are rounded to 18 decimal places when necessary; area results display up to six. Positive measurements accept up to 1 billion in their entered units, item estimates up to 1 trillion, and box counts are always whole numbers. These are software limits, not practical installation recommendations.

Frequently Asked Questions

How many tiles do I need for 100 sq ft?

With 12 × 24 in tiles, zero grout and no waste, the area estimate is 50 tiles. With 10% waste it is 55 tiles. Different dimensions, joints and cuts change the answer; 100 sq ft alone is not enough to specify a purchase.

How many extra tiles should I buy?

Use the suggested waste as an editable starting point, then confirm an allowance for the job. Whole-box rounding may add more pieces beyond that allowance. The seven extra pieces in the worked example are box-rounding extras above the 65-tile estimate, not the entire waste allowance.

Does grout spacing reduce the tile count?

A wider joint increases the modeled repeating footprint and can reduce an area-based tile count. It does not replace an edge-by-edge layout and never changes the manufacturer-coverage purchasing calculation.

Can I calculate multiple rooms, walls or backsplashes?

Yes. Add up to six rectangular surfaces using the same tile product, or enter a known combined area. For a wall, use height and width as the two dimensions and deduct untiled openings once. Calculate each tile product separately.

How accurate is the estimate?

The arithmetic retains full input precision for the stated formulas and rounds whole items upward. The quantity is still an area estimate, not an optimized cutting plan. Check jobsite dimensions, layout constraints and carton details with an installer or supplier before ordering. Reset clears measurements and results and restores US units, dimension entry, straight pattern and the suggested 10% waste.